added check for Chrome dialog boxes on each Tab url navigation

Freedomain Social Media Poster.ahk

@@ -1126,6 +1126,250 @@ Return
 
 */
 
+
+
+
+; -------------------------------Discord-------------------------------
+PostToDiscord:
+CurrentSite := "Discord"
+
+; SaveOrPostProgress(Message:="Posting through API",PostType:="Tooltip,ErrorLoggingTextFile")
+Message = Posting Through API
+SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
+
+if(DiscordParlerWebhookURL = ""){
+	Message = Webhook Link not found. Please set "DiscordParlerWebhookURL" in %SettingsIniFilepath%.
+	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+	Return
+}
+
+
+if(BoldTitleWAPI){
+	if(NewLineBetweenTitle)
+	Message = **%PostTitle%**`n`n%PostBody%
+	else, 
+	Message = **%PostTitle%**`n%PostBody%
+}
+else, { ; NOT bold title
+	if(NewLineBetweenTitle)
+	Message = %PostTitle%`n`n%PostBody%
+	else, 
+	Message = %PostTitle%`n%PostBody%
+}
+
+
+
+if(ImageAttachmentFilepath != ""){
+	SingleQuotationMark = "
+	; remove any single quotes from filepath
+	ImageAttachmentFilepath := StrReplace(ImageAttachmentFilepath, SingleQuotationMark, "")
+
+	if(StrLen(Message) > 1999){ ; split message into two parts if longer than this
+		loop % StrLen(Message) {
+
+			if(A_index < 1900)
+			Continue
+
+			SplitCharNumber := A_index
+			; IndexMinusOne := A_index - 1
+
+			SplitLocationText := SubStr(Message, SplitCharNumber, 1)
+			if(SplitLocationText = " "){
+				Break
+				; Msgbox % "SplitLocation: " SplitLocation
+			}
+		}
+
+
+
+		DiscordMessagePartOne := SubStr(Message, 1, SplitCharNumber)
+		SplitCharNumber := SplitCharNumber + 1
+		DiscordMessagePartTwo := SubStr(Message, SplitCharNumber)
+		; Msgbox % "DiscordMessagePartOne: " DiscordMessagePartOne
+		; Msgbox % "DiscordMessagePartTwo: " DiscordMessagePartTwo
+
+		Status := SaveOrPostProgress(Message:=DiscordMessagePartOne,PostType:="ErrorLoggingTextFile,DiscordParler")
+		Status := SaveOrPostProgress(Message:=DiscordMessagePartTwo,PostType:="ErrorLoggingTextFile,DiscordParler")
+		Status := UploadImageToDiscord(DiscordParlerWebhookURL, "", ImageAttachmentFilepath)
+
+		; Msgbox % "StatusOne: " StatusOne
+		; Msgbox % "StatusTwo: " StatusTwo
+
+/*		if(!InStr(StatusOne, "id")){ ; if error for each of the messages, post its
+			parsed := JSON.Load(StatusOne)
+			StatusOneFailure := parsed.content[1]
+
+			parsed := JSON.Load(StatusTwo)
+			StatusTwoFailure := parsed.content[1]
+
+			Message = Partial Failure for the following reason: %StatusOneFailure% OR %StatusTwoFailure%
+			SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+		}
+		*/
+		} ; end of strlen > 1999
+		else, {
+			Status := UploadImageToDiscord(DiscordParlerWebhookURL, Message, ImageAttachmentFilepath)
+			SaveOrPostProgress(Message:="Status",PostType:="ErrorLoggingTextFile")
+
+			if(!InStr(Status, "id")){
+				parsed := JSON.Load(Status)
+				Error := parsed.content[1]
+				; Msgbox % "error: " error
+				Message = Discord Post Failed due to API Issue. Error was saved to errorlog; please forward to Yuriy
+				SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+				Return
+			}
+		}
+	}
+	else {
+		if(StrLen(Message) > 1999){ ; split message into two parts if longer than this
+			loop % StrLen(Message) {
+
+				if(A_index < 1900)
+				Continue
+
+				SplitCharNumber := A_index
+
+				SplitLocationText := SubStr(Message, SplitCharNumber, 1)
+				if(SplitLocationText = " "){
+					Break
+				}
+			}
+
+			DiscordMessagePartOne := SubStr(Message, 1, SplitCharNumber)
+			SplitCharNumber := SplitCharNumber + 1
+			DiscordMessagePartTwo := SubStr(Message, SplitCharNumber)
+
+			Status := SaveOrPostProgress(Message:=DiscordMessagePartOne,PostType:="ErrorLoggingTextFile,DiscordParler")
+			Status := SaveOrPostProgress(Message:=DiscordMessagePartTwo,PostType:="ErrorLoggingTextFile,DiscordParler")
+		}
+		else,
+		SaveOrPostProgress(Message:=Message,PostType:="ErrorLoggingTextFile,DiscordParler")
+	}
+
+	IniWrite, Successful, %StatusFileFilePath%, Status, Discord
+	AddToTotalPostsPostedCount()
+
+	Message = Submitted Successfully
+	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
+
+
+	Return
+	; -------------------------------/Discord-------------------------------
+
+/*
+*/
+
+; -------------------------------Telegram-------------------------------
+; API documentation
+; https://core.telegram.org/bots/api#sendmessage
+PostToTelegram:
+CurrentSite := "Telegram"
+
+; SaveOrPostProgress(Message:="Posting through API",PostType:="Tooltip,ErrorLoggingTextFile")
+Message = Posting Through API
+SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
+
+
+if(TelegramBotToken = "" Or TelegramBotChatID =""){
+	Message = TelegramBotToken or TelegramBotChatID is missing from %SettingsIniFilepath%. `nPlease input them and rerun the script.
+	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+	; Msgbox, 4096, Error!, TelegramBotToken or TelegramBotChatID is missing from %SettingsIniFilepath%. `nPlease input them and rerun the script.
+	Return
+}
+
+
+LineBreakChar = `%0A ; Used for API
+
+
+TelegramTitle := ASCIISTRReplace(PostTitle)
+TelegramBody := ASCIISTRReplace(PostBody)
+
+
+/*	TelegramTitle := PostTitle
+	TelegramBody := PostBody
+
+	*/
+
+	; Msgbox % "TelegramBody: " TelegramBody
+
+	if(PostBody = ""){
+		if(BoldTitleWAPI)
+		Message := "*" . TelegramTitle . "*"
+		else, 
+		Message := TelegramTitle
+	}
+	else, { ; if postbody is not blank
+		; MsgBox, we in post body
+		if(BoldTitleWAPI){
+			if(NewLineBetweenTitle)
+			Message := "*" . TelegramTitle . "*" . "`n`n" . TelegramBody
+			else, 
+			Message := "*" . TelegramTitle . "*" . "`n" . TelegramBody
+		}
+		else, { ; NOT Bold Title
+			if(NewLineBetweenTitle)
+			Message := TelegramTitle . "`n`n" . TelegramBody
+			else, 
+			Message := TelegramTitle . "`n" . TelegramBody
+
+		}
+	}
+
+	; Msgbox % "Message: " Message
+	; REMOVE
+	; Message := PostTitle . "`n" . PostBody
+
+	; Msgbox % "TelegramTitle: " TelegramTitle
+	; Msgbox % "TelegramBody: " TelegramBody
+
+	; Msgbox % "Message: " Message
+
+
+	if(ImageAttachmentFilepath != "" AND StrLen(Message) > 1020){ ; utilize function that converts image to MIME/multi form 
+		; Telegram API character limit of 4096 for a basic message.
+		; @todo: add functionality to split messages longer than 4096 characters
+		; msgbox, 2
+
+		if(BoldTitleWAPI)
+		TelegramTitle := "*" . TelegramTitle . "*"
+		else, 
+		TelegramTitle := TelegramTitle
+
+		Status := SendTelegramPhoto(TelegramBotToken, TelegramBotChatID, ImageAttachmentFilepath, caption := TelegramTitle )       ; you could add more options; compare the Telegram API docs
+		Status := SendTelegramMessage(TelegramBotToken, TelegramBotChatID, text := TelegramBody )
+	}
+	else if(ImageAttachmentFilepath != "" AND StrLen(Message) <= 1020){
+		Status := SendTelegramPhoto(TelegramBotToken, TelegramBotChatID, ImageAttachmentFilepath, caption := Message )       ; you could add more options; compare the Telegram API docs
+
+	}
+	else, 
+	{ ; send just the text
+		; Msgbox % "Message: " Message
+		Status := SendTelegramMessage(TelegramBotToken, TelegramBotChatID, text := Message )
+	}
+
+	if(Status){
+		Message = Upload Failed due to API issue. Telegram API Returned Value:`n %Status%
+		SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+		Return
+	}
+
+	; SaveOrPostProgress(Message:=Message,PostType:=",ErrorLoggingTextFile,DiscordParler")
+	IniWrite, Successful, %StatusFileFilePath%, Status, Telegram
+	AddToTotalPostsPostedCount()
+
+	Message = Submitted Successfully
+	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
+
+
+	Return
+	; -------------------------------/Telegram-------------------------------
+
+/*
+*/
+
+
 ;---------------Facebook----------------------------------
 PostToFacebook:
 CurrentSite := "Facebook"
@@ -1337,7 +1581,6 @@ if(Status){
 	Return
 }
 
-
 ; Check login status by checking the header of the page for "Feed" text
 loop, 5 {
 	SaveOrPostProgress(Message:="Checking Login Status",PostType:="Tooltip,ErrorLoggingTextFile")
@@ -1362,42 +1605,9 @@ if(!InStr(status, "Feed")){
 }
 
 
-/*try CurrentTabURL := driver.Url
-; Msgbox % "CurrentTabURL: " CurrentTabURL
-if(InStr(CurrentTabURL, "/login")){
-	SaveOrPostProgress(Message:="Cookies Expired. Trying to Log back in",PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-	Xpath = //div[@class='form__contain']//button[@class='button'][normalize-space()='Log In']
-	Status := Selenium_LoopToClickXpath(Xpath:=Xpath,NumOfLoops:=2,SleepLength:=1000)
-	if(Status){
-		SaveOrPostProgress(Message:="Failed to click login button",PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-	}
-	sleep, 1000
-}
-
-*/
-
-; Message = Trying to click on "Parley.." to start new post
-; SaveOrPostProgress(Message:=Message,PostType:="Tooltip")
-
-; sleep, 5000 ; sleep 2 seconds for page to fully load in case it's being slow
-
-; js = document.getElementsByClassName('input-trigger')[0].click()
-; try driver.executeScript(JS)			;Execute Javascript
-
-
- /*   ; if failed to click into box then error out
-    if(Status){ 
-    	Message = Post Failed: Page didn't load properly
-    	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-    	SaveDriverURLOFErrorPage()
-    	Return
-    }
-
-    */
-    ; Msgbox % "Status: " Status
 
-    Message = Inputting Post
-    SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile")
+Message = Inputting Post
+SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile")
 
 /*    ; click into popup box
     xpath = //div[@placeholder='Parley...']
@@ -1438,43 +1648,6 @@ if(InStr(CurrentTabURL, "/login")){
     	Return
     }
 
-    ; driver.FindElementByXPath(Xpath).SendKeys("heyyyy")
-
-
-
- /*   ; Input Post content pop up
-    Xpath = //div[@id='create-parley-wysiwyg']
-    Status := Selenium_LoopToSendValueToXpath(Xpath:=Xpath,NumOfLoops:=2,SleepLength:=1000,StringTextContent:=PostTitleAndBody)
-    if(Status){
-    	Message = Failed to input Post Message with relative Xpath
-    	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-
-    	; Input post with JS
-    	JsToExecute = document.querySelector("#create-parley-wysiwyg").innerText = '%JSPostTitleAndBody%'
-    	try Status := driver.executeScript(JsToExecute)
-    	; Check if text got input
-    	JsToExecute = return document.querySelector("#create-parley-wysiwyg").innerText
-    	try Status := driver.executeScript(JsToExecute)
-    	if(Status = ""){
-    		Message = Failed to Input with JS as well
-    		SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-
-    		Xpath = /html[1]/body[1]/div[3]/div[1]/div[1]/div[1]/div[1]/div[3]/div[1]/div[2]/div[1]/div[1]/form[1]/div[1]/div[2]/div[1]
-    		Status := Selenium_LoopToSendValueToXpath(Xpath:=Xpath,NumOfLoops:=2,SleepLength:=1000,StringTextContent:=PostTitleAndBody)
-    		if(Status){
-    			try CurrentTab := driver.url
-    			Message = Failed to input Post: `nCurrent Tab URL: %CurrentTab%
-    			; SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-    			SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-    			SaveDriverURLOFErrorPage()
-    			Return
-    		}
-
-    	}
-    }
-    */
-
-
     if(ImageAttachmentFilepath != ""){
     	Message = Attaching Image
     	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile")
@@ -1510,43 +1683,6 @@ if(InStr(CurrentTabURL, "/login")){
     	Return
     }
 
-/*    Message = Waiting 5 seconds to double check that the post got submitted
-    SaveOrPostProgress(Message:=Message,PostType:="Tooltip, ErrorLoggingTextFile")
-    sleep, 5000
-
-    ; check the text contents of the input box to make sure that the post got submitted
-    JsToExecute = return document.querySelector("div[id='create-parley-wysiwyg'] div").textContent;
-    try Status := driver.executeScript(JsToExecute)
-    if(Status != ""){
-    	Xpath = //button[@id='submit-button'] ; click the submit button again
-    	Status := Selenium_LoopToClickXpath(Xpath:=Xpath,NumOfLoops:=2,SleepLength:=1000)
-
-	; Message = Post got input but did not submit properly and still present after 5 seconds`nPost Content: %Status%
-	; SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-
-	
-}
-
-*/
-; DevModeMsgBox(Status)
-
-  /*  js = document.getElementById('submit-button').click();
-    status := JS_TryToExecute(js,2,2000)
-
-    */
-
-/*    sleep, 3000
-    jscheck = return document.getElementsByClassName('emoji-wysiwyg-editor')[0].textContent;
-    try Status := driver.executeScript(jsCheck)
-    if(Status != ""){
-    	Message = Failed to Submit Post (#2523)
-    	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-    	Return
-    }
-    */
-
-    ; Msgbox % "Status: " Status
-
 
     IniWrite, Successful, %StatusFileFilePath%, Status, Parler
 
@@ -1562,283 +1698,147 @@ if(InStr(CurrentTabURL, "/login")){
     Return
     ; -------------------------------/Parler-------------------------------
 
+/*
+*/
 
+; -------------------------------SubScribeStar-------------------------------
+PostToSubscribeStar:
+CurrentSite := "SubScribeStar"
 
 
+IniRead, SubscribeStarProfileURL, %SettingsIniFilepath%, SocialMediaPoster, SubscribeStarProfileURL, %A_Space%
+if(SubscribeStarProfileURL = ""){
+	Message = SubscribeStarProfileURL is blank. Please update Settings.ini
+	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+	Return
+}
 
+SaveOrPostProgress(Message:="Navigating to Post Creation Page",PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
 
-    ; -------------------------------Discord-------------------------------
-    PostToDiscord:
-    CurrentSite := "Discord"
-
-    ; SaveOrPostProgress(Message:="Posting through API",PostType:="Tooltip,ErrorLoggingTextFile")
-    Message = Posting Through API
-    SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-
-    if(DiscordParlerWebhookURL = ""){
-    	Message = Webhook Link not found. Please set "DiscordParlerWebhookURL" in %SettingsIniFilepath%.
-    	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-    	Return
-    }
-
-
-    if(BoldTitleWAPI){
-    	if(NewLineBetweenTitle)
-    	Message = **%PostTitle%**`n`n%PostBody%
-    	else, 
-    	Message = **%PostTitle%**`n%PostBody%
-    }
-    else, { ; NOT bold title
-    	if(NewLineBetweenTitle)
-    	Message = %PostTitle%`n`n%PostBody%
-    	else, 
-    	Message = %PostTitle%`n%PostBody%
-    }
-
-
-/*
-    if(PostTitle != "")
-    Message = **%PostTitle%**`n%PostBody%
-    else,
-    Message = %PostBody%
-
-    */
-    if(ImageAttachmentFilepath != ""){
-    	SingleQuotationMark = "
-    	; remove any single quotes from filepath
-    	ImageAttachmentFilepath := StrReplace(ImageAttachmentFilepath, SingleQuotationMark, "")
-
-    	if(StrLen(Message) > 1999){ ; split message into two parts if longer than this
-    		loop % StrLen(Message) {
-
-    			if(A_index < 1900)
-    			Continue
-
-    			SplitCharNumber := A_index
-    			; IndexMinusOne := A_index - 1
-
-    			SplitLocationText := SubStr(Message, SplitCharNumber, 1)
-    			if(SplitLocationText = " "){
-    				Break
-    				; Msgbox % "SplitLocation: " SplitLocation
-    			}
-    		}
 
+Status := NavigateFromBaseURLTo(SubscribeStarProfileURL)
+if(Status){
+	Message = Failed to Navigate to SubScribeStar Page
+	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
+}
 
+Status := CheckCurrentTabForCurrentSite()
+if(Status){
+	Return
+}
 
-    		DiscordMessagePartOne := SubStr(Message, 1, SplitCharNumber)
-    		SplitCharNumber := SplitCharNumber + 1
-    		DiscordMessagePartTwo := SubStr(Message, SplitCharNumber)
-    		; Msgbox % "DiscordMessagePartOne: " DiscordMessagePartOne
-    		; Msgbox % "DiscordMessagePartTwo: " DiscordMessagePartTwo
+Message = Checking Login Status
+SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile")
 
-    		Status := SaveOrPostProgress(Message:=DiscordMessagePartOne,PostType:="ErrorLoggingTextFile,DiscordParler")
-    		Status := SaveOrPostProgress(Message:=DiscordMessagePartTwo,PostType:="ErrorLoggingTextFile,DiscordParler")
-    		Status := UploadImageToDiscord(DiscordParlerWebhookURL, "", ImageAttachmentFilepath)
+; check for Log In button text 
+js = return document.querySelector(".top_bar-login.is-button").innerText;
+try LoginStatus := driver.executeScript(js)
 
-    		; Msgbox % "StatusOne: " StatusOne
-    		; Msgbox % "StatusTwo: " StatusTwo
+if(InStr(LoginStatus, "Log In")){ ; need to log in
+	SaveOrPostProgress(Message:="Navigating to login page",PostType:="Tooltip,ErrorLoggingTextFile")
 
-/*		if(!InStr(StatusOne, "id")){ ; if error for each of the messages, post its
-			parsed := JSON.Load(StatusOne)
-			StatusOneFailure := parsed.content[1]
+	try driver.Get("https://www.subscribestar.com/login")	; navigate to login page
+	try driver.executeScript("return document.readyState").equals("complete") ; wait until page loads completely before proceeding
 
-			parsed := JSON.Load(StatusTwo)
-			StatusTwoFailure := parsed.content[1]
+	if(AutoLogin){
 
-			Message = Partial Failure for the following reason: %StatusOneFailure% OR %StatusTwoFailure%
-			SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-		}
-		*/
-		} ; end of strlen > 1999
-		else, {
-			Status := UploadImageToDiscord(DiscordParlerWebhookURL, Message, ImageAttachmentFilepath)
-			SaveOrPostProgress(Message:="Status",PostType:="ErrorLoggingTextFile")
+		; Check if email box contains text inputted by chrome
+		js = return document.querySelector("input[placeholder='your email']").value;
+		status := driver.executeScript(js)
+		if(StrLen(Status) > 0){ ; click enter on the email input field
+			Xpath = //input[@placeholder='your email']
+			driver.FindElementByXPath(Xpath).SendKeys(driver.Keys.ENTER)
 
-			if(!InStr(Status, "id")){
-				parsed := JSON.Load(Status)
-				Error := parsed.content[1]
-				; Msgbox % "error: " error
-				Message = Discord Post Failed due to API Issue. Error was saved to errorlog; please forward to Yuriy
-				SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-				Return
-			}
+			driver.executeScript("return document.readyState").equals("complete") ; wait until page loads completely before proceeding
 		}
 	}
-	else {
-		if(StrLen(Message) > 1999){ ; split message into two parts if longer than this
-			loop % StrLen(Message) {
-
-				if(A_index < 1900)
-				Continue
-
-				SplitCharNumber := A_index
-
-				SplitLocationText := SubStr(Message, SplitCharNumber, 1)
-				if(SplitLocationText = " "){
-					Break
-				}
-			}
-
-			DiscordMessagePartOne := SubStr(Message, 1, SplitCharNumber)
-			SplitCharNumber := SplitCharNumber + 1
-			DiscordMessagePartTwo := SubStr(Message, SplitCharNumber)
-
-			Status := SaveOrPostProgress(Message:=DiscordMessagePartOne,PostType:="ErrorLoggingTextFile,DiscordParler")
-			Status := SaveOrPostProgress(Message:=DiscordMessagePartTwo,PostType:="ErrorLoggingTextFile,DiscordParler")
-		}
-		else,
-		SaveOrPostProgress(Message:=Message,PostType:="ErrorLoggingTextFile,DiscordParler")
-	}
-
-	IniWrite, Successful, %StatusFileFilePath%, Status, Discord
-	AddToTotalPostsPostedCount()
-
-	Message = Submitted Successfully
-	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-
-
-	Return
-	; -------------------------------/Discord-------------------------------
-
-	; -------------------------------SubScribeStar-------------------------------
-	PostToSubscribeStar:
-	CurrentSite := "SubScribeStar"
-
-
-	IniRead, SubscribeStarProfileURL, %SettingsIniFilepath%, SocialMediaPoster, SubscribeStarProfileURL, %A_Space%
-	if(SubscribeStarProfileURL = ""){
-		Message = SubscribeStarProfileURL is blank. Please update Settings.ini
-		SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+	else, {
+		SaveOrPostProgress(Message:="Login Expired. Please log back in",PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+		SaveDriverURLOFErrorPage()
 		Return
 	}
+}
 
-	SaveOrPostProgress(Message:="Navigating to Post Creation Page",PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
 
+Message = Inputting Post
+SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile")
 
-	Status := NavigateFromBaseURLTo(SubscribeStarProfileURL)
-	if(Status){
-		Message = Failed to Navigate to SubScribeStar Page
-		SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-	}
+; Click on "Start your post by clicking here"
+Xpath = //div[contains(text(),'Create Post')]
+Status := Selenium_LoopToClickXpath(Xpath:=Xpath,NumOfLoops:=5,SleepLength:=1000)
+if(Status){
+	Message = Failed to Click "Create Post" button with relative xpath
+	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
 
-	Status := CheckCurrentTabForCurrentSite()
+	Xpath = //div[@class='new_post']//div[@class='new_post-create_button']
+	Status := Selenium_LoopToClickXpath(Xpath:=Xpath,NumOfLoops:=2,SleepLength:=1000)
 	if(Status){
-		Return
-	}
-
-	Message = Checking Login Status
-	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile")
-
-	; check for Log In button text 
-	js = return document.querySelector(".top_bar-login.is-button").innerText;
-	try LoginStatus := driver.executeScript(js)
-
-	if(InStr(LoginStatus, "Log In")){ ; need to log in
-		SaveOrPostProgress(Message:="Navigating to login page",PostType:="Tooltip,ErrorLoggingTextFile")
-
-		try driver.Get("https://www.subscribestar.com/login")	; navigate to login page
-		try driver.executeScript("return document.readyState").equals("complete") ; wait until page loads completely before proceeding
-
-		if(AutoLogin){
-
-			; Check if email box contains text inputted by chrome
-			js = return document.querySelector("input[placeholder='your email']").value;
-			status := driver.executeScript(js)
-			if(StrLen(Status) > 0){ ; click enter on the email input field
-				Xpath = //input[@placeholder='your email']
-				driver.FindElementByXPath(Xpath).SendKeys(driver.Keys.ENTER)
+		Message = Failed to click "Create Post" button with Contains(Text) xpath and relative Xpath - Trying wtih ID
+		SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
+		; SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
 
-				driver.executeScript("return document.readyState").equals("complete") ; wait until page loads completely before proceeding
-			}
-		}
-		else, {
-			SaveOrPostProgress(Message:="Login Expired. Please log back in",PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+		Status := Selenium_LoopToClickID(IDName:="cover_upload",NumOfLoops:=5,SleepLength:=1000)
+		if(Status){
+			Message = Login Expired. Please log back in
+			SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
 			SaveDriverURLOFErrorPage()
 			Return
 		}
 	}
+}
 
+; sleep, 5000
+; msgbox
 
-	Message = Inputting Post
-	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile")
-
-	; Click on "Start your post by clicking here"
-	Xpath = //div[contains(text(),'Create Post')]
-	Status := Selenium_LoopToClickXpath(Xpath:=Xpath,NumOfLoops:=5,SleepLength:=1000)
-	if(Status){
-		Message = Failed to Click "Create Post" button with relative xpath
-		SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-
-		Xpath = //div[@class='new_post']//div[@class='new_post-create_button']
-		Status := Selenium_LoopToClickXpath(Xpath:=Xpath,NumOfLoops:=2,SleepLength:=1000)
-		if(Status){
-			Message = Failed to click "Create Post" button with Contains(Text) xpath and relative Xpath - Trying wtih ID
-			SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-			; SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-
-			Status := Selenium_LoopToClickID(IDName:="cover_upload",NumOfLoops:=5,SleepLength:=1000)
-			if(Status){
-				Message = Login Expired. Please log back in
-				SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-				SaveDriverURLOFErrorPage()
-				Return
-			}
-		}
-	}
-
-	; sleep, 5000
-	; msgbox
+; Clear any previous content from the post box
+Message = Clearing if any text exists from an unposted post
+SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile")
 
-	; Clear any previous content from the post box
-	Message = Clearing if any text exists from an unposted post
-	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile")
+Xpath = //trix-editor[@role='textbox']
+Status := Selenium_LoopToClearXpath(Xpath,NumOfLoops:=5,SleepLength:=1000)
+if(Status){
+}
+; try driver.FindElementByXPath(Xpath).clear()   ;Clears content from an element and sets
 
-	Xpath = //trix-editor[@role='textbox']
-	Status := Selenium_LoopToClearXpath(Xpath,NumOfLoops:=5,SleepLength:=1000)
-	if(Status){
-	}
-	; try driver.FindElementByXPath(Xpath).clear()   ;Clears content from an element and sets
 
+; Input Text into pop-up edit box
+SaveOrPostProgress(Message:="Inputting Post Content",PostType:="Tooltip,ErrorLoggingTextFile")
 
-	; Input Text into pop-up edit box
-	SaveOrPostProgress(Message:="Inputting Post Content",PostType:="Tooltip,ErrorLoggingTextFile")
+Xpath = //trix-editor[@role='textbox']
+Status := Selenium_LoopToSendValueToXpath(Xpath:=Xpath,NumOfLoops:=5,SleepLength:=1000,StringTextContent:=PostTitleAndBody)
+if(Status){
+	Message = Failed to Input Post using Direct Xpath. Trying with Relative
+	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
 
-	Xpath = //trix-editor[@role='textbox']
+	Xpath = /html/body/div/div[3]/div[2]/div[2]/div/div[1]/form/div[2]/div[1]/trix-editor
 	Status := Selenium_LoopToSendValueToXpath(Xpath:=Xpath,NumOfLoops:=5,SleepLength:=1000,StringTextContent:=PostTitleAndBody)
 	if(Status){
-		Message = Failed to Input Post using Direct Xpath. Trying with Relative
+		Message = Failed to Input Post using Relative Xpath. Trying with Javascript
 		SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
 
-		Xpath = /html/body/div/div[3]/div[2]/div[2]/div/div[1]/form/div[2]/div[1]/trix-editor
-		Status := Selenium_LoopToSendValueToXpath(Xpath:=Xpath,NumOfLoops:=5,SleepLength:=1000,StringTextContent:=PostTitleAndBody)
-		if(Status){
-			Message = Failed to Input Post using Relative Xpath. Trying with Javascript
-			SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
 
-			
-			SubscribeStarJSDescription := FormatTextToJSText(PostTitleAndBody) 
-			js = document.querySelector("trix-editor[role='textbox']").value = "%SubscribeStarJSDescription%";
-			try driver.executeScript(js)    ;Executes a Javascript on the webpage, mostly used for buttons.
-			catch e {
-				Message = Failed to Input Post Contents (E#8281)
-				SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-				SaveDriverURLOFErrorPage()
-				Return
-			}
-			; msgbox, 3
+		SubscribeStarJSDescription := FormatTextToJSText(PostTitleAndBody) 
+		js = document.querySelector("trix-editor[role='textbox']").value = "%SubscribeStarJSDescription%";
+		try driver.executeScript(js)    ;Executes a Javascript on the webpage, mostly used for buttons.
+		catch e {
+			Message = Failed to Input Post Contents (E#8281)
+			SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
+			SaveDriverURLOFErrorPage()
+			Return
 		}
+		; msgbox, 3
+	}
 
 
-	}
+}
 
-	; Attach an image if a filepath was provided
-	if(ImageAttachmentFilepath != ""){
-		SaveOrPostProgress(Message:="Attaching Image",PostType:="Tooltip,ErrorLoggingTextFile")
+; Attach an image if a filepath was provided
+if(ImageAttachmentFilepath != ""){
+	SaveOrPostProgress(Message:="Attaching Image",PostType:="Tooltip,ErrorLoggingTextFile")
 
-		; this works for both images and videos
-		Xpath = //input[@multiple='multiple']
-		driver.FindElementByXPath(Xpath).SendKeys(ImageAttachmentFilepath)
+	; this works for both images and videos
+	Xpath = //input[@multiple='multiple']
+	driver.FindElementByXPath(Xpath).SendKeys(ImageAttachmentFilepath)
 
 
 /*		Xpath = //span[@class='trix-button-group trix-upload-buttons']//button[2]
@@ -1887,113 +1887,6 @@ if(InStr(CurrentTabURL, "/login")){
 	Return
 	; -------------------------------/SubScribeStar-------------------------------
 
-	; -------------------------------Telegram-------------------------------
-	; API documentation
-	; https://core.telegram.org/bots/api#sendmessage
-	PostToTelegram:
-	CurrentSite := "Telegram"
-
-	; SaveOrPostProgress(Message:="Posting through API",PostType:="Tooltip,ErrorLoggingTextFile")
-	Message = Posting Through API
-	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-
-
-	if(TelegramBotToken = "" Or TelegramBotChatID =""){
-		Message = TelegramBotToken or TelegramBotChatID is missing from %SettingsIniFilepath%. `nPlease input them and rerun the script.
-		SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-		; Msgbox, 4096, Error!, TelegramBotToken or TelegramBotChatID is missing from %SettingsIniFilepath%. `nPlease input them and rerun the script.
-		Return
-	}
-
-
-	LineBreakChar = `%0A ; Used for API
-	
-
-	TelegramTitle := ASCIISTRReplace(PostTitle)
-	TelegramBody := ASCIISTRReplace(PostBody)
-
-
-/*	TelegramTitle := PostTitle
-	TelegramBody := PostBody
-
-	*/
-
-	; Msgbox % "TelegramBody: " TelegramBody
-
-	if(PostBody = ""){
-		if(BoldTitleWAPI)
-		Message := "*" . TelegramTitle . "*"
-		else, 
-		Message := TelegramTitle
-	}
-	else, { ; if postbody is not blank
-		; MsgBox, we in post body
-		if(BoldTitleWAPI){
-			if(NewLineBetweenTitle)
-			Message := "*" . TelegramTitle . "*" . "`n`n" . TelegramBody
-			else, 
-			Message := "*" . TelegramTitle . "*" . "`n" . TelegramBody
-		}
-		else, { ; NOT Bold Title
-			if(NewLineBetweenTitle)
-			Message := TelegramTitle . "`n`n" . TelegramBody
-			else, 
-			Message := TelegramTitle . "`n" . TelegramBody
-
-		}
-	}
-
-	; Msgbox % "Message: " Message
-	; REMOVE
-	; Message := PostTitle . "`n" . PostBody
-
-	; Msgbox % "TelegramTitle: " TelegramTitle
-	; Msgbox % "TelegramBody: " TelegramBody
-
-	; Msgbox % "Message: " Message
-
-
-	if(ImageAttachmentFilepath != "" AND StrLen(Message) > 1020){ ; utilize function that converts image to MIME/multi form 
-		; Telegram API character limit of 4096 for a basic message.
-		; @todo: add functionality to split messages longer than 4096 characters
-		; msgbox, 2
-
-		if(BoldTitleWAPI)
-		TelegramTitle := "*" . TelegramTitle . "*"
-		else, 
-		TelegramTitle := TelegramTitle
-
-		Status := SendTelegramPhoto(TelegramBotToken, TelegramBotChatID, ImageAttachmentFilepath, caption := TelegramTitle )       ; you could add more options; compare the Telegram API docs
-		Status := SendTelegramMessage(TelegramBotToken, TelegramBotChatID, text := TelegramBody )
-	}
-	else if(ImageAttachmentFilepath != "" AND StrLen(Message) <= 1020){
-		Status := SendTelegramPhoto(TelegramBotToken, TelegramBotChatID, ImageAttachmentFilepath, caption := Message )       ; you could add more options; compare the Telegram API docs
-
-	}
-	else, 
-	{ ; send just the text
-		; Msgbox % "Message: " Message
-		Status := SendTelegramMessage(TelegramBotToken, TelegramBotChatID, text := Message )
-	}
-
-	if(Status){
-		Message = Upload Failed due to API issue. Telegram API Returned Value:`n %Status%
-		SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,ErrorSummaryVar,DiscordErrorLogging")
-		Return
-	}
-
-	; SaveOrPostProgress(Message:=Message,PostType:=",ErrorLoggingTextFile,DiscordParler")
-	IniWrite, Successful, %StatusFileFilePath%, Status, Telegram
-	AddToTotalPostsPostedCount()
-
-	Message = Submitted Successfully
-	SaveOrPostProgress(Message:=Message,PostType:="Tooltip,ErrorLoggingTextFile,DiscordErrorLogging")
-
-
-	Return
-	; -------------------------------/Telegram-------------------------------
-
-
 
 
 	; -------------------------------LinkedIn-------------------------------